C10100 Copper Sheet Factory Price

• Type: Copper Sheets
• Application: Air Condition or Refrigerator, Water Tube, Water Heater, Oil Cooler Pipe
• Material: Red Copper
• Model NO.: C10100 Copper sheet
• Shape: Plate
• Alloy: Alloy
• Color: Red
• Standard: ASTM
• Transport Package: Export Standard Packing
• Specification: 1-20mm
• Trademark: Zayi
• Origin: China
• HS Code: 7409119000
• Production Capacity: 5000 Tons Per Month

Product Description

Product Name: C10100 Copper sheet factory price
Brief introduction:
    Our copper plate inventory mainly consists of C10100 and C11000 with more available through special order. These unalloyed coppers are mainly used because of their excellent electrical and thermal conductivity. Other characteristics include, outstanding corrosion resistance, ease of fabrication, and good strength and fatigue resistance. Other copper type alloys available from stock include, C17200, C17510, C18150, and C18200.
    C10100 Oxygen-Free Electronic Copper, also known as OFE, is a 99.99% pure copper with 0.0005% oxygen content. C101 achieves a minimum 101% IACS conductivity rating. This copper is finished to a final form in a carefully regulated, oxygen-free environment. C10100 OFE has High ductility, high electrical and thermal conductivity and low volatility under high vacuum. 

AUTOMOTIVE: Automotive Rectifiers
ELECTRICAL: Transistor Component Bases, High Resistance-Ratio Cryogenic Shunts, Bus Conductors, Wave Guides, Hollow Conductors, Anodes for Vacuum Tubes, Coaxial Cable, Coaxial Tube, Klystrons, Microwave Tubes, Bus Bars, Lead-in Wire, Vacuum Seals, Conductors, Glass-to-Metal Seals
Chemical Composition of Copper alloy C101

Table 1. Typical chemical composition for copper alloy C101

%	C101
Others (Total)	0.0-0.10
Copper (Cu)	Balance

 

Properties of Copper alloy C101

Mechanical Properties of Copper alloy C101

Table 2. Typical mechanical properties for copper alloy C101

Grade	C101
Tensile Strength (MPa)	200-360
Proof Stress (MPa)	50-340
Elongation A50 mm	50-5%
Hardness Vickers	40-110 HV

 

Physical Properties of Copper alloy C101

Table 3. Typical physical properties for copper alloy C101

Property	Value
Density	8.92 g/cm^3
Melting Point	1083 °C
Modulus of Elasticity	117 GPa
Electrical Resistivity	0.171 x 10^-6 Ω.m
Thermal Conductivity	391.1 W/m.K
Thermal Expansion	16.9 x 10^-6/K

 

Alloy Designations

HC copper corresponds to the following designations:

CEN	BS	UNS	ISO
CW004A	C101	C11000	Cu-ETP

 

Corrosion Resistance of Copper alloy C101

Corrosion resistance is either good or excellent in most environments and atmospheres other than those containing ammonia ions.

Fabrication of Copper alloy C101

Cold Working of Copper alloy C101

Copper alloy C101 can be readily cold worked. When in the annealed condition, it can be readily bent to shape and has excellent ductility.

It work hardens relatively slowly and can be annealed in neutral or oxidising atmospheres.

Hot Working of Copper alloy C101

Copper alloy C101 is very readily hot worked.

Heat Treatment of Copper alloy C101

Solution treatment or annealing can be done by rapid cooling after heating to 370-650°C.

Machinability

Copper alloy C101 has a machinability rating of 20 when Alloy 360 FC Brass is 100.

Welding of Copper alloy C101

Soldering of Copper alloy C101 is excellent. Brazability and butt welding are also rated as good. Gas shielded arc welding has a fair rating. All other welding processes are not recommended.

Applications of Copper alloy C101

Copper alloy C101 is typically used in:

• General engineering
• Electronics
• Automotive
• Domestic Appliances
• Cold formed components

F A Q                                             
1. How can I know whether you are a reliable company?
We are engaged in copper over 10 years and have high visibility in domestic. We welcome you to inspect our company at any time.
2. Can you guarantee your products?
Yes, we guarantee your 100% satisfaction on all our products. Please feel free to feedback us immediately.
3. Do you provide samples?
Yes, we can provide most of the product samples. We will charge a little sample fee. But we will return the charge if you place an order. if you asked to use DHL, Blue Dart Express, FedEx, etc. to send samples, you can inform us in advance to prepare.
4. Can I visit your company?
Of course, If you want to order our products and visit our company, please contact us to make an appointment.
5. How much is the freight?
It depends on the number and transport methods. When asked about the freight, we want you to let us know your detailed information , such as the product name and quantity and your favorite mode of transport, as well as your designated port or airport. We thank you for providing us the information to estimate the cost.