| Type: | Seamless |
|---|---|
| Technique: | Hot Rolled |
| Material: | Alloy Steel |
|
Still deciding? Get samples of US$ 0/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product | P275NL1 P355N P355NH P355NL1 P275NL2 seamless steel pipe in stock |
| Standard | EN10216 |
| Material | P275NL1 P355N P355NH P355NL1 P275NL2 |
| Surface | Black paint, varnish, oil, galvanized |
| Pipe Length | 5.8 m to 12 m, can be customized according to the length requirements |
| Pipe Ends | Plain Ends, Beveled Ends |
| End Protector | 1. Plastic caps (small OD) 2. Iron protector (large OD) |
| Application | Fluid pipe, oil pipe, gas pipe, structure pipe, boiler tubes |
| Test | Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size |
| Productivity | 50000 tons per month |
| Min Order | 20 ton |
| Remark | Special design available according to requirement |
Chemical composition % of steel P275NL1 (1.0488)
| According EN 10216-3:2014: 0.5=< Mn=<1.5; S=<0.008; N=<0.02; Ti=<0.04; |
| C | Si | Mn | Ni | P | S | Cr | Mo | V | N | Nb | Ti | Al | Cu | - |
| max 0.16 | max 0.4 | 0.8 - 1.5 | max 0.5 | max 0.025 | max 0.015 | max 0.3 | max 0.08 | max 0.05 | max 0.012 | max 0.05 | max 0.03 | max 0.02 | max 0.3 | Nb+Ti+V < 0.05 |
Chemical composition % of steel P355N (1.0562)
| According EN 10216-3:2014: C=<0.2; 0.9=< Mn=<1.7; S=<0.02; N=<0.02; Ti=<0.04; |
| C | Si | Mn | Ni | P | S | Cr | Mo | V | N | Nb | Ti | Al | Cu | - |
| max 0.18 | max 0.5 | 1.1 - 1.7 | max 0.5 | max 0.025 | max 0.015 | max 0.3 | max 0.08 | max 0.1 | max 0.012 | max 0.05 | max 0.03 | max 0.02 | max 0.3 | Nb+Ti+V < 0.12 |
Chemical composition % of steel P355NH (1.0565)
| C | Si | Mn | Ni | P | S | Cr | Mo | V | N | Nb | Ti | Al | Cu | - |
| max 0.18 | max 0.5 | 1.1 - 1.7 | max 0.5 | max 0.025 | max 0.015 | max 0.3 | max 0.08 | max 0.1 | max 0.012 | max 0.05 | max 0.03 | max 0.02 | max 0.3 | Nb+Ti+V < 0.12 |
Chemical composition % of steel P355NL1 (1.0566)
| According EN 10216-3:2014: 0.9=< Mn=<1.7; S=<0.008; N=<0.02; Ti=<0.04; |
| C | Si | Mn | Ni | P | S | Cr | Mo | V | N | Nb | Ti | Al | Cu | - |
| max 0.18 | max 0.5 | 1.1 - 1.7 | max 0.5 | max 0.025 | max 0.015 | max 0.3 | max 0.08 | max 0.1 | max 0.012 | max 0.05 | max 0.03 | max 0.02 | max 0.3 | Nb+Ti+V < 0.12 |
Chemical composition % of steel P275NL2 (1.1104)
| According EN 10216-3:2014: 0.5=< Mn=<1.5; S=<0.005; N=<0.02; Ti=<0.04; |
| C | Si | Mn | Ni | P | S | Cr | Mo | V | N | Nb | Ti | Al | Cu | Nd | - |
| max 0.16 | max 0.4 | 0.8 - 1.5 | max 0.5 | max 0.02 | max 0.01 | max 0.3 | max 0.08 | max 0.05 | max 0.012 | max 0.05 | max 0.03 | max 0.02 | max 0.3 | max 0.05 | Nb+Ti+V < 0.05 |
Manufacturing:
){kind=link}