Inconel 625 Alloy 625 Nickel 625 Nickel-Base Alloy Bar Factory Price

• Type: Stainless Steel Bars
• Standard: ASTM, AISI, GB, JIS, DIN, EN
• Grade: Inconel 601
• Model NO.: Inconel 625 bar
• Certification: ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS
• Shape: Round
• Technique: Hot Rolled
• Surface Treatment: Polished
• Material: Inconel 625
• Transport Package: Export Standard Packing
• Specification: 10-200mm
• Trademark: Zayi
• Origin: China
• HS Code: 7505120000
• Production Capacity: 50000 Pieces Per Month

Product Description

Product name:Inconel 625 Alloy 625 Nickel 625 nickel-base alloy bar factory price
Brief introduction of Inconel 625

Inconel Alloy 625 (UNS designation N06625) is a nickel-based superalloy that possesses high strength properties and resistance to elevated temperatures. It also demonstrates remarkable protection against corrosion and oxidation. Its ability to withstand high stress and a wide range of temperatures, both in and out of water, as well as being able to resist corrosion while being exposed to highly acidic environments makes it a fitting choice for nuclear and marine applications.
chemical properties of Inconel 625 include:

	Cr	Mo	Co	Nb+Ta	Al	Ti	C	Fe	Mn	Si	P	S	Ni
Min	20	8	--	3.15	--	--	--	--	--	--	--	--	Balance
Max	23	10	1	4.15	.4	.4	.1	5	.5	.5	.015	.015	Balance

Mechanical Properties

Physical Properties

Physical Property	°C	Metric Units	°F	British Units
Density	22	8.44 g/cubic cm	72	0.305 lb/cubic in.
Electrical Resistivity	23 100 200 300 400 500 600	1.26 microhm-m 1.27 1.28 1.29 1.30 1.31 1.32	74 212 392 572 752 932 1112	49.6 microhm-in. 50.0 50.4 50.8 51.2 51.6 52.0
Mean Coefficient of Thermal Expansion	20-204 20-316 20-427 20-538 20-649 20-760 20-871 20-982	13.1 x 10(-6)m/m-°C 13.5 13.9 14.4 15.1 15.7 16.6 17.3	68-400 68-600 68-800 68-1000 68-1200 68-1400 68-1600 68-1800	7.3 microinches/in.-°F 7.5 7.7 8.0 8.4 8.7 9.2 9.6
Thermal Conductivity	23 100 200 300 400 500 600	9.8 W/M-°C 11.4 13.4 15.5 17.6 19.6 21.3	74 212 392 572 752 932 1112	68 Btu-in./ft².-hr.-°F 79 93 108 122 136 148
Specific Heat	0 100 200 300 400 500 600	429 J/kg-°C 446 463 480 496 513 560	32 212 392 572 752 932 1112	0.102 Btu/lb-°F 0.107 0.111 0.115 0.118 0.123 0.134

Average Dynamic Modulus of Elasticity *

Form	Condition	Test Temp., F(C)	Average Dynamic Modulus of Elasticity, psi x 10(6) (MPa)
Plate, 3/8 in. (9.5 mm) thick	Annealed at 1925°F (1052°C), rapid cooled	Room 200 (93) 400 (204) 600 (316) 800 (427) 1000 (538) 1200 (649) 1400 (760) 1600 (871) 1800 (982)	30.2 (208,000) 29.2 (201,000) 28.8 (199,000) 27.7 (191,000) 26.7 (184,000) 25.6 (176,000) 24.3 (168,000) 22.8 (157,000) 21.2 (146,000) 18.7 (129,000)

* Average of five tests at each temperature.
 

Mechanical Properties

Average Impact Strength, Plate *

Aging Temperature, F (C)	Aging Time, hrs.	Average Charpy V-Notch Impact Strength,
		ft. lbs.	J
Annealed**	--	81	110
1200 (649)	1000 4000 8000 16000	11 8 5 4	15 11 7 5
1400 (760)	1000 4000 8000 16000	5 4 5 4	7 5 7 5
1600 (871)	1000 4000 8000 16000	12 11 15 14	16 15 20 19

*Average of four tests on 1/2-in. (12.7mm) plate from a single heat.
**1875F (1024C), rapid cooled.
Average Hardness and Tensile Data, Room Temperature

Condition	Form	Ultimate Tensile Strength, ksi (MPa)	Yield Strength at 0.2% offset,ksi (MPa)	Elongation in 2" percent	Hardness, Rockwell
Annealed at 1925°F (1052°C), rapid cooled	Sheet 0.014-0.063" thick	132.0 (910)	67.9 (468)	47	B94
Annealed at 1925°F (1052°C), rapid cooled	Sheet,* 0.0.78-0.155" thick	131.5 (907)	67.4 (465)	45	B97
Annealed at 1925°F (1052°C), rapid cooled	Plate,*** 1/4" 1/2" 3/4" 1.00" 1-1/2" 1-3/4"	132.0 (910) 130.0 (896) 132.3 (912) 127.2 (877) 127.3 (878) 128.0 (883)	65.5 (452) 67.0 (462) 80.0 (552) 75.3 (519) 73.7 (508) 66.0 (455)	46 44 44 42 43 44	B94 B98 B98 B97 B97 C20

*Based on average of 146 tests
**Based on average of 67 tests.
***Based on average of 4 or less tests.
Aged Hardness, Room Temperature*

Form	Aging Temperature, F (C)	Aging Tme, hrs.	Hardness, Rockwell A
Plate, 1/2 in. (12.7 mm) thick	Annealed**	--	58
	1200 (649)	1000 4000 8000	68 68 68
	1400 (760)	1000 4000 8000	65 66 65
	1600 (871)	1000 4000 8000	60 60 60

*Single tests from a single heat.
**1875F (1024C), rapid cooled.
Average Tensile Data, Room Temperature*

Form	Aging Temperature, F (C)	Aging Tme, hrs.	Ultimate Tensile Strength, Ksi (MPa)	Yield Strength at 0.2% offset, Ksi (MPa)	Elongation in 2 in., (50.8 mm), percent
Plate, 1/2 in. (12.7 mm) thick	Annealed**	--	127.7 (880)	66.2 (456)	46
	1200 (649)	1000 4000 8000 16000	165.0 (1138) 163.6 (1128) 164.2 (1132) 165.4 (1140)	122.3 (843) 117.9 (813) 117.8 (812) 118.5 (817)	28 24 18 12
	1400 (760)	1000 4000 8000 16000	142.9 (985) 145.5 (1003) 142.6 (983) 140.4 (968)	95.5 (658) 104.1 (718) 97.4 (672) 96.1 (663)	17 12 13 12
	1600 (871)	1000 4000 8000 16000	130.0 (896) 130.0 (896) 127.0 (876) 128.4 (885)	68.3 (471) 66.4 (458) 63.7 (439) 63.4 (437)	30 29 26 32

*Average of three tests from a single heat.
**1875F (1024C), rapid cooled.
Average Tensile Data, Sheet*

Test Temperature, °F(°C)	Ultimate Tensile Strength, ksi (MPa)	Yield Strength at 0.2% offset,ksi (MPa)	Elongation in 2" percent
Room 200 400 600 800 1000 1200 1400 1600 1800 2000	138.8 (957) 133.3 (919) 129.4 (892) 125.6 (866) 122.2 (843) 119.9 (827) 119.6 (825) 88.4 (609) 52.1 (359) 25.0 (172) 13.3 (92)	72.0 (496) 67.3 (464) 62.2 (429) 59.5 (410) 59.2 (408) 58.8 (405) 57.0 (393) 55.3 (381) 34.9 (241) 10.8 (75) 6.1 (42)	38 41 44 45 45 46 47 70 69 108 89

*Annealed at 1925°F (1052°C), rapid cooled.
Average Rupture Data, Sheet*

Test Temperature, °F(°C)	Average Rupture Strength, ksi (MPa) for Time Indicated
	10 hrs	100 hrs	1000 hrs
1200 (649) 1400 (760) 1600 (871)	82 (565) 36 (248) 12 (83)	71 (490) 27 (186) 6.7 (46)	60 (414) 20 (138)** 3.7 (26)**

*Annealed at 1925°F (1052°C), rapid cooled.
 

Select AMS Number:

AMS Number	Alloy	Type	UNS	Cross Ref. Spec	Misc./Shape
AMS 5715	Inconel 601	Nickel	N06601	-	Bar
AMS 5715	Inconel 601	Nickel	N06601	-	Forging
AMS 5715	Inconel 601	Nickel	N06601	-	Ring
AMS 5870	Inconel 601	Nickel	N06601	-	Plate
AMS 5870	Inconel 601	Nickel	N06601	-	Sheet
AMS 5870	Inconel 601	Nickel	N06601	-	Strip

F A Q                                             
1. How can I know whether you are a reliable company?
We are engaged in alloy rod over 10 years and have high visibility in domestic. We welcome you to inspect our company at any time.
2. Can you guarantee your products?
Yes, we guarantee your 100% satisfaction on all our products. Please feel free to feedback us immediately.
3. Do you provide samples?
Yes, we can provide most of the product samples. We will charge a little sample fee. But we will return the charge if you place an order. if you asked to use DHL, Blue Dart Express, FedEx, etc. to send samples, you can inform us in advance to prepare.
4. Can I visit your company?
Of course, If you want to order our products and visit our company, please contact us to make an appointment.
5. Can you make sizes according to my request ?
Yes,customization service is available,OEM business is appreciated.
When you place the orders,we arrange the production asap,When finish the orders, we will inform you and also we arrange the shipping in the same time.
6. How much is the freight?
It depends on the number and transport methods. When asked about the freight, we want you to let us know your detailed information , such as the product name and quantity and your favorite mode of transport, as well as your designated port or airport. We thank you for providing us the information to estimate the cost.